Samsung WA52A5500AW/US User Manual - Page 29
Step 5, Step 6
![]() |
View all Samsung WA52A5500AW/US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
STEP 5 Power on Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet protected by a 15-amp fuse or circuit breaker. Then, press Power to turn on the washer. STEP 6 Run a test cycle Run a test cycle as follows to check if your washer is properly installed. 1. Load about 6 lb. of laundry into the tub. 2. Press Power to turn on your washer. 3. Turn the Cycle Selector to RINSE+SPIN. 4. Press and hold Start/Pause (Hold to Start) to start the test cycle. 5. The washer should not rock or vibrate excessively when water is supplied or when washing and spinning, and should drain well during the spin cycle. NOTE • If water leaks while water is being supplied or drained, check the water connections. See "Connect the water hose" on page 22. • If the washer rocks and vibrates excessively, level your washer again. See "Level the washer" on page 26. Installation Untitled-6 29 English 29 2021-05-25 8:26:36
![](/manual_guide/products/samsung-wa52a5500awus-user-manual-fa8f497/29.png)