Samsung VS20A95000E/AA User Manual - Page 31

Problem Vacuum cleaner stops operation during cleaning. Suction force decreases suddenly and the vacuum cleaner makes a vibrating sound. Cleaning is finished but small dust particles come out of the accessories. Solutions • As this product has the overheating prevention device of the motor, product will stop operation temporarily for the following conditions. After correcting the cause of the problem, turn the product on again. (This case may differ depending on the ambient temperature.) -- When the vacuum cleaner operates with a full dustbin. -- When the vacuum cleaner operates with a brush clogged. -- When the Extension Crevice Tool is used for long hours. • Check whether the brush, the dustbin or the Telescopic Pipe is clogged with foreign matter and remove it. • Check whether the dustbin is fully filled with dust. If it is, empty the bin. • Check whether the filter is dirty. If it is, clean the filter. • After cleaning, operate the vacuum cleaner for 10 seconds or more to suck the small dust particles. Appendix English 31