Samsung VR50T95735W/AA User Manual - Page 16
Notes and cautions
![]() |
View all Samsung VR50T95735W/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Notes and cautions Installation NOTE • If the cleaning area is wooden floors, it is best to install the Clean Station along the grain of wooden floors. • If the power switch is off, the Jet Bot will not charge even if it is docked on the Clean Station. • Always keep the Clean Station on. - If power is not supplied to the Clean Station, the Jet Bot cannot find it and cannot automatically recharge. - If the Jet Bot is left detached from the Clean Station, the battery will drain naturally. • Do not attach the Boundary Markers as (-----) shape. - The Jet Bot may not detect it and cross the boundary. Charging NOTE • If the battery overheats during charging, it may take longer to charge. • When auto charging is not working, do the following: - Turn the power switch (at the side the Jet Bot) off and on again. - Unplug the Clean Station's power plug and then plug it back on. - Unplug the Clean Station, and then check whether there is any foreign matter on the charging pins and clean charging pins of the Jet Bot and the Clean Station with a dry cloth or rag. - Check for any obstacles such as reflective objects, chairs, etc. near the Clean Station. • If the Jet Bot is left detached from the Clean Station, the battery will drain naturally. - Try to keep the Jet Bot being charged on the Clean Station. (However, turn off the power switch and leave the Clean Station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc.) Using NOTE • The Jet Bot may get caught on thresholds of entrance door or veranda, etc. during cleaning. - To restart operation, shut off the power switch, move the Jet Bot to an area where it can move easily, and then turn on the power again. • In a dark area, the Jet Bot may not recognize an object. - Before cleaning, remove obstacles on the floor. • The Jet Bot cannot completely clean areas which it cannot enter, such as small space between the corner, between the sofas or walls, etc. - Please use another cleaning tool to clean them regularly. • The Jet Bot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning. - Please use another cleaning tool to clean them regularly. • After turning the Jet Bot off, wait for a while and then turn it on for a normal rebooting. • When the Clean Station smells, replace a Dust Bag or clean filters. 16 English
![](/manual_guide/products/samsung-vr50t95735waa-user-manual-52d3131/16.png)