Samsung NZ30K7880US/AA Installation Guide - Page 8
Make electrical connection
View all Samsung NZ30K7880US/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation instructions STEP 3-1 Bracket Guide Installing -Main The bracket Guide can be installed after cooktop is placed into the cutout. Bottom of Cooktop 1. Attach bracket guide to bottom of cooktop and side of wall. 2. Adjust to match hole of bracket and bottom of cooktop. 3. Tighten screw enough to hold bracket in place when cooktop is placed in cutout. 4. Using 2 or more people, turn the cooktop right side up and place in cutout. M 4 L10 screw M 4 L16 screw NOTE Make sure that the front edge of the cooktop is parallel to the front edge of the countertop. If repositioning is needed, lift entire cooktop up from cutout to avoid scratching the countertop. Make electrical connection This cooktop is manufactured with ground wire (bare or green) connected to the cooktop frame connect the cooktop cable to the junction box through the UL listed or CSA approved conduit connector. Electrical Connection Options If your home has: 4-wire direct And you will be connecting to : Afused disconnect or circuit breaker box Go to section: 4-Wire Cable from Power supply to 3-Wire Cable from Cooktop 3-wire direct Afused disconnect or circuit breaker box 3-Wire Cable from Power supply to 3-Wire Cable from Cooktop STEP 3-2 Alternative Bracket Guide Installing Countertop UNC 243/16 L75 screw 1. Attach bracket guide to bottom and select bracket location. 2. Tighten screw bracket guide to base of cooktop. 3. Install UNC 243/16 L75 screw until it touches the bottom of the countertop. Cooktop M4 X L10 screw Turn the thumbscrew until bracket touches the bottom of the countertop. Do not over tighten. Installation instructions 8 English Induction Install_NZ30K7880U_NZ36K7880U_DG68-00827A-05_EN+MES+CFR.indb 8 2018-07-31 4:10:08