Ryobi RY907000 User Manual 13 - Page 1
Ryobi RY907000 Manual
![]() |
View all Ryobi RY907000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
RY906500 / RY907000 ASSEMBLY UPDATE These instructions replace the instructions for Installing Legs on page 11 of your operator's manual and in the quick reference guide. INSTALLING FEET See Figure 1. Locate the following items: 2 rubber feet 2 lock nuts 2 bolts Insert bolt through rubber foot, then through the cross brace as shown. Thread lock nut onto bolt and tighten one full turn past snug. NOTE: Be careful not to overtighten so that foot material collapses. Repeat with remaining foot. Fig. 1 A C D A C D B TECHTRONIC INDUSTRIES POWER EQUIPMENT 1428 Pearman Dairy Road, Anderson, SC 29625, USA Phone 1-800-860-4050 www.ryobitools.com 991000922 5-2-15 (REV:01) A - Bolt (boulon, perno) B - Cross brace (renfort transversal, través del travesaño) C - Rubber foot (pied en caoutchouc, pie de goma) D - Lock nut (écrou frein, tuerca de bloqueo)
![](/manual_guide/products/ryobi-ry907000-user-manual-13-9adb616/1.png)