Ryobi RY401180VNM Operation Manual - Page 18

TROUBLESHOOTING IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER. PROBLEM Mower cutting grass unevenly. POSSIBLE CAUSE SOLUTION Lawn is rough or cutting height not set Adjust the cutting height. properly. Mower not mulching properly. Wet grass clippings sticking to the Wait until the grass dries before m­ owing. underside of the deck. Mower hard to push. High grass, rear of mower housing and Raise cutting height. blade dragging in heavy grass, or cutting height too low. Mower not bagging properly. Cutting height set too low. Grass blocking rear chute of mower. Raise cutting height. Stop the motor, remove start key, and battery. Remove grass catcher bag and remove the blockage. Mower vibrating at higher speed. Blade is unbalanced, excessively or Replace the blade. unevenly worn. Bent motor shaft. Stop the motor, remove start key, and battery. Inspect for damage. Have repaired by an authorized service center before restarting. Motor stops while cutting. Cutting height set too low. Raise the cutting height. 1-800-525-2579 MAKE THE MOST OF YOUR PURCHASE! Go to http://register.ryobitools.com and register your new tool on-line. Your product has been fully tested prior to shipment to ensure your complete satisfaction. For any questions about operating or maintaining your product, call the RYOBI Help Line! This product has a Five-year Limited Warranty for personal, family, or household use (90 days for business or commercial use). For warranty details, visit www.ryobitools.com or call (toll free) 1-800-525-2579. 14 - English