Ryobi PCL1307K1 Operation Manual 1 - Page 5

ASSEMBLY WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. If any parts are damaged or missing, please call 1-800-525-2579 for assistance. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always remove the battery pack from the product when you are assembling parts, cleaning, or when not in use. Removing these energy sources will prevent accidental starting that could cause serious personal injury. WARNING: The radio is not waterproof. Do not submerge in liquid. Failure to heed this warning could result in serious personal injury. NOTICE: Always refer to the manual for any device recommended for use as an attachment or accessory. Proper use of any device, when attached to the radio, is the sole responsibility of the operator. Improper use may damage the device or the product. WARNING: This radio is capable of producing sound levels that can be dangerous to long-term hearing. Listening to music at high volume for any period of time can cause noiseinduced hearing loss. The higher the volume, the less time required before your hearing could be affected. APPLICATIONS You may use this product for the following purposes:  Receive and play local FM radio  Charging USB capable devices  Streaming audio from BLUETOOTH® enabled devices INSTALLING/REMOVING BATTERY PACK See Figure 1, page 8. To install battery pack:  Place the battery pack in the radio, aligning the rib on the battery pack with the groove in the battery port.  Make sure the latches on the battery pack snap into place and the battery pack is secured to the radio before beginning operation.  Depress the latches to remove the battery pack. NOTE: Always remove battery pack from radio when not in use. For complete charging instructions, see the operator's manuals for your battery pack and charger. LCD DISPLAY The illustrations of the LCD display shown in this manual are only examples of the frequencies you may see on your product and are not the exact frequencies that you may choose to listen to. When the product is not connected to a power supply, the LCD display will remain off. If the product is connected to a power supply and in the ON position, LEDs will light the display. You can view the frequency and settings in use on the LCD display. 5 - English