Rocketfish RF-GSL010A Quick Setup Guide (English) - Page 2

6 Insert a top cradle bar into one of the shorter arms on the center crossbar. 10 Slide out the pole on the base bar until it locks into place. Locked 7 Align the holes on the top cradle bar and crossbar, then insert a bolt clip through the holes. 8 Repeat Steps 6 and 7 to attach the other top cradle bar. 11 Insert the base bar into the stand feet until it locks into place. 12 Place the turntable on the stand. CAUTION: This stand is intended only for use with a DJ Hero™ turntable accessory. Using the stand for other products or objects, particularly those weighing more than 15 pounds, may result in instability, which may cause injury. When the turntable is on the stand, do not lift the stand by the posts. 9 Snap the top supports onto the cradle bars. Make sure that the rounded clips on the supports are on top of the cradle bars. Specifications • Compatible with PlayStation®2, PlayStation®3, Xbox 360®, and Wii™ • Stand dimensions: 26.57 × 19.09 × 29.92 (low) / 35.83 (high) inches (67.5 × 48.5 × 76 (low) / 91 (high) cm) • Individual product weight: 7.34 lbs. (3.345 kg) • Weight limit: approximately 15 lbs. (6.8 kg) 90-day limited warranty Visit www.rocketfishproducts.com for details. © 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners. ENGLISH 10-0798