Ricoh C222SF Support Guide - Page 47

Product Support Guide, G181 / G183 / G184, Revision 1.1 01/08

Get Ricoh C222SF - Aficio SP Color Laser PDF manuals and user guides
UPC - 026649061363
View all Ricoh C222SF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Product Support Guide Revision 1.1 (01/08) PNP Name Destination 2nd Transfer Fuser Temp. Registration MODEL: G181 / G183 / G184 47 Image 2nd Transfer Front 2nd Transfer Back Fuser Temperature Horiz. Tray1 Vert.Tray1 Horiz.Tray2 Vert.Tray2 Horiz.Bypass Vert.Bypass Determines the maximum amount of ink/toner you can use in any area of your image. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] Setting 0: Off NA Model: RICOH/ 'nul' EU Model: RICOH/ NRG/ LANIER ASIA Model: RICOH/ LANIER China Model: RICOH Sets the destination and updates the engine setting. JPN/ NA (Default)/ EU/ ASIA/ China Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) / 1 uA/step] Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) / 1 uA/step] Adjusts the temperature of the fusing unit, based on the default value. [-30 to 0 / 0 (Default) / 2°C/step] Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 4 mm/step] Adjusts the vertical registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 0.24 mm/step] Adjusts the horizontal registration for tray 2. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 4 mm/step] Adjusts the vertical registration for tray 2. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 0.3 mm/step] Adjusts the horizontal registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 4 mm/step] Adjusts the vertical registration for the bypass tray. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 0.3 mm/step]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Product Support Guide
MODEL:
G181 / G183 / G184
Revision 1.1 (01/08)
47
Image
Determines the maximum amount of
ink/toner you can use
in any area of your image. This is where you
are controlling exactly how much ink will be
used during printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
P
N
P Name
NA Model: RICOH/ 'nul'
EU Model: RICOH/ NRG/ LANIER
ASIA Model: RICOH/ LANIER
China Model: RICOH
Destination
Sets the destination and updates the engine
setting.
JPN/ NA (Default)/ EU/ ASIA/ China
2nd Transfer Front
Adjusts the transfer roller current, based on
the default value.
[-15 to 15 / 0 (Default) / 1 uA/step]
2nd Transfer Back
Adjusts the transfer roller current, based on
the default value.
[-15 to 15 / 0 (Default) / 1 uA/step]
2nd Transfer Fuser
Temp.
Fuser
Temperature
Adjusts the temperature of the fusing unit,
based on the default value.
[-30 to 0 / 0 (Default) / 2°C/step]
Horiz. Tray1
Adjusts the horizontal registration for tray 1.
If the machine settings are reset to the
factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Vert.Tray1
Adjusts the vertical registration for tray 1. If
the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 0.24 mm/step]
Horiz.Tray2
Adjusts the horizontal registration for tray 2.
If the machine settings are reset to the
factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Vert.Tray2
Adjusts the vertical registration for tray 2. If
the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Horiz.Bypass
Adjusts the horizontal registration for the
bypass tray. If the machine settings are reset
to the factory defaults, this value does not
change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Registration
Vert.Bypass
Adjusts the vertical registration for the
bypass tray. If the machine settings are reset
to the factory defaults, this value does not
change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]