Reebok 710 Treadmill English Manual - Page 14
If You Do Not Connect The Con
View all Reebok 710 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
10. Insert the Console Frame (96) into the Left and Right Handrails (76, 77). Attach the Console Frame with four 1/4" x 1" Screws (8) and four 1/4" Star Washers (11); do not tighten the Screws yet. Be careful not to pinch the Upright Wire (81). First, tighten the two indicated #10 x 3/4" Screws (6) in each end of the Crossbar (102); do not overtighten the Screws. Then, tighten the other two #10 x 3/4" Screws (6) in each end of the Crossbar. Tighten the four 1/4" x 1" Screws (8), four 5/16" x 1" Flat Head Screws (4), and the two 5/16" x 1" Bolts (5). 10 96 76 4, 5 11 8 First 81 6 77 5 4 102 11 8 First 6 11. With the help of a second person, hold the console assembly near the Left Handrail (76) and the Right Handrail (not shown). Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Connect the ground wires from the console assembly to the Console Ground Wires (98). 11 Ground Wires 98 Console Wire 81 Console Assembly Console Wire 81 76 Wire Tie 14