Rane RAD6 All RAD Specifications are included in the HAL All Specifications D - Page 53
DR4 Logic I/O Expander Specifications, Data Sheet - 53
View all Rane RAD6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Specifications DR4 Logic I/O Expander Specifications Parameter IR Remote Ports ...Type ...Power ...Length Logic Inputs ...Connector ...Internal Pull-up ...Logic High Input Level ...Logic Low Input Level Logic Outputs ...Connector ...Internal Pull-up ...Sink Current ...LED Drive Current ...Logic High Output Level ...Logic Low Output Level Analog Control Input ...Connector ...Control Voltage Range ...Internal Pull-up ...A/D Converter Wiring Power Requirement Ambient Room Temperature Unit: Conformity Unit: Size ...Weight Shipping: Size ...Weight Specification Limit Conditions/Comments 6 RJ-45 connectors Compatible with IR2 remote Protected to +24 V, reverse polarity protected 24 VDC @ 100 mA max Normal state 300 meters / 1000 feet max Shielded CAT 5e cable or better 8 Mini Euroblock 51.1 kΩ, 5.0 V 6-pin, 3.81 mm pitch, black Protected to +24 V > 2.0 V min Normal state < 0.9 V max External circuit must sink > 80 µA to assert 8 Relay drive, LED or logic level output Mini Euroblock 6-pin, 3.81 mm pitch, Black 1.0 kΩ, 5.0 V Protected to +30 V, reverse polarity protected 200 mA max Output FET on 2 mA Output FET off, Driving an LED with Vf = 2.0 V 4.7 V min Output FET off, Output Current = 0 mA 0.1 V max Output FET on, Sink Current < 200 mA 8 ADC inputs for potentiometer control Mini Euroblock 6-pin, 3.81 mm pitch, black 0-5 V / Normal = 5 V typ Protected to +24V, reverse polarity protected 51.1 kΩ 10-20 kΩ, linear taper poteniometer recommended 8-bit, 2 kHz sample rate Class 2 All rear panel terminals 100 to 240 VAC 50/60 Hz, 18 W max 104 °F / 40 °C max Maximum external loading CE, FCC, CCSAUS 1.73"H x 19"W x 8.25"D (4.4 cm x 48.3 cm x 20.9 cm) 4.5 lb (2 kg) 6.5" x 20.3" x 13.75" (9.5 cm x 52 cm x 35 cm) 7.5 lb (3.5 kg) Data Sheet - 53