Rane RAD1 All RAD Specifications are included in the HAL All Specifications D - Page 42
HAL2 Specifications, Data Sheet - 42
View all Rane RAD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Specifications HAL2 HEURISTIC AUDIO LABORATORY HAL2 Specifications Parameter Specification Analog I/O 8 x 8 ...Connectors Euroblock ...CODEC 24-bit, 48 kHz Mic Inputs Active Balanced ...Gain Settings +10 to +60 dB ...Input Impedance 2.6 kΩ ...Phantom Power +48 VDC ...Equivalent Input Noise ...THD+N ...Maximum Input ...CMRR Line Inputs ...Gain Settings ...Input Impedance ...THD+N ...Maximum Input -127 dBu < 0.008 % 3 dBV (1.4 Vrms) 55 dB Active Balanced Unity & +10 to +20 dB 5.1 kΩ < 0.008 % 20.8 dBu ...CMRR 45 dB ...Frequency Response 20-20k Hz, +0, -.05 dB ...Dynamic Range 109 dB ...Interchannel Isolation 104 dB Outputs Active Balanced ...Impedance 200 Ω ...Maximum Output +20.9 / +16.4 dBu ...Frequency Response 20-20k Hz, +0.1 / -0.3 dB ...Dynamic Range 109 dB ...Interchannel Isolation 110 dB Indicators ...Signal -50 dBFS ...Overload -0.5 dBFS Propagation Delays ...RAD In to RAD Out 1.71 ms ...RAD In to Analog Out 1.85 ms ...Analog In to RAD Out 2.25 ms ...Analog In to Analog Out 2.39 ms ...HAL2 AES3 In to AES3 Out 2.50 ms Limit Conditions/Comments 4 x 6-pin, 5 mm pitch, Green = Inputs, Orange = outputs 1 dB steps 1% 1 kHz, each leg to ground 10 mA max per input max 20-20k Hz, 150 Ω source, 60 dB gain, A-weighted typ 20-20k Hz, +4 dBu, +10 dB gain, 20 kHz BW typ Input gain at +10 dB, 1 kHz, < 1% THD+N min 1 kHz 1 dB steps from +10 to +20 1% 1 kHz, each leg to ground typ 20-20k Hz, +4 dBu, unity gain, 20 kHz BW typ Input gain at 0 dB, 1 kHz,