RCA RP2463 User Guide - Page 5

THE CD PLAYER EN THE DISPLAY 1 23 7 ESP•XTREME bass boost P 1 4 56 1. Random Playback 2. ESP• XTREME - 180 sec ESP ESP - 45 sec ESP 3. Is displayed when Bass Boost is ON. Press Bass Boost momentarily to toggle between Bass Boost 1, Bass Boost 2 and off. 4. Program mode 5. Repeat entire disc or repeat current track. 6. Is displayed when the control button is on HOLD position. 7 Battery Indicator. Listening to a Compact Disc Slide the open switch to the right to open the door. Insert a disc and press lightly on the centre to lock. Close the door. Playback Press Play/Pause button on the main unit or Play/Stop on the remote control to start playback. Rd DISC will appear in the display. Then, the total number of tracks and time of the CD will be displayed. If the disc com- partment is empty or the disc cannot be played, No Disc will appear in the display. The EXTREME SKIP PROTECTION* (EPS) system prevents sound interruptions when impacts or vibrations occur. Extreme skip protection consumes less power and increases the battery life. Therefore, the ESP function is always ON. After many successive impacts, the buffer might be emptied causing a brief sound interruption for the memory to reload. ESP•XTREME (180 seconds buffer) - Press Play/Pause on the main unit or Play/Stop on the remote control to power on the unit. The display will show ESP•XTREME. ESP (45 seconds buffer) - For better lis- tening quality, press prog•display while pressing Play/Pause to turn the unit on. The display will show ESP. 5 THE CD PLAYER Skip /Search Press to skip to the previous track. Press and hold to search backwards in a track. Press to skip to the next track. Press and hold to search forward in a track. Listening to a CD in your car EN (For RP2467 only) 1. Select a power source (either battery power or the car DC adaptor) 2. Insert the cassette adaptor into the tape deck and plug the cord into the CD player's HEADPHONES jack. Pause Press Play/Pause on the main unit again to pause playback. The minutes and secondes flash when interrupted 3 . Insert a compact disc and press Play/ Pause button to power on the unit (180 sec ESP). Press and hold prog•display while you press Play/Pause to turn on the unit for 45 sec ESP set- Stop ting. Adjust CD player's volume to a mid level Press Stop on the main unit or (make sure the Bass Boost is turned off). Play/Stop on the remote control 4. Use the car stereo to adjust volume, during playback to end CD playback. tone . Adjust the volume of your CD player for better volume control. Lock Slide control switch on the main unit to HOLD position to lock the button on the 5. Before ejecting the cassette after you have finished listening, make sure the car stereo's volume is turned down. main unit to avoid accidental activation of unwanted functions. The hold icon will show on the dis- play when the controls are locked. Do the same to lock the buttons on the remote control. NOTE: Remember to slide the CONTROL switch to ON position to activate the controls again. 6