RCA RCU410MSL User Guide - Page 7

DVD Menu Function The DVD Menu is used to navigate thru the Navigation screens, to change settings such as language, sub-titles, etc. Entering the DVD Menu Mode: 1. Push the DVD•AUX button on the remote. 2. Push the MENU key. DVD•AUX This puts the remote in DVD Menu Mode. The DVD Menu should now be visible on the television. The INDIC TOR LIGHT will blink continuously to indicate the remote is now in DVD Menu Mode. (BLINK) While in DVD MENU MODE these buttons will function as follows: VOLUME UP/DOWN button will operate as CURSOR RIGHT/LEFT. CH+/- button will operate as CURSOR UP/DOWN. Pushing the ENTER button will select the highlighted item. The numeric buttons may also be used to select the MENU choice. Note: Not all functions in competitive models and brands of DVD systems may be fully supported. Exiting the DVD Menu Mode: Push the DVD•AUX button on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of DBS Menu Mode and will revert to it's normal mode of operation. DVD•AUX Note: The remote will automatically exit the DVD•CABLE Menu Mode after 15 seconds of inactivity with no keys being pushed. Special notes: 1. Because of the wide variety of menu formats, some experimenting may be required. Sleep Feature This feature will turn off your TV at the time you choose from 1 to 99 minutes. To Program Sleep Feature: INDICATOR LIGHT 1. Press and hold the SLEEP button. INDICATOR LIGHT will stay lit. Release the SLEEP button. 2. Enter time in minutes using the numerical key pad. Indicator light should go off. (Minutes 1 thru 9: press 0 before the actual number Maximum: 99 minutes) 3. Leave remote aimed at television. (Sleep Feature will not work unless remote is left aimed at television.) To Turn Off The Sleep Timer: Sleep timer program will be cancelled and reset to zero by either of the following: 1. Press and hold SLEEP button until INDICATOR LIGHT blinks or press ON•OFF button, turning TV OFF. (BLINK) ON OFF 13 14