Pyle SBA10A Instruction Manual - Page 4

Troubleshooting If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous pages. If problems persist, read the following troubleshooting tips which may help eliminate the problems. PROBLEM POSSIBLE REASON SOLUTION Not switching on. Power LED not 'on' NO +12v to power wire NO power to remote wire Check fuses and connections to battery. Check remote on connections to head unit. Fuse broken Replace fuse with correct type and amperage. Not working, but status LED 'on' Fuse blown Head Unit Replace fuse with correct type and amperage. Move unit to vented area. Turn head unit down. Check head unit volume level. No sound Gain control not set up control Connections Check all power, remote on and ground connections 6 www.PyleUSA.com Features: • 10" Slim Woofer • Low-Level RCA Input • High-Level Speaker Line Input with AUTO POWER ON/OFF selector • Blue LED Power Status Indicator • Red LED Protection Status Indicator • Remote Bass Boost Level Control • Delay Remote Turn-On Thermal • Short and Overload Protection Circuits What's in the Box: • • Remote Subwoofer Level Control • Remote Subwoofer Control Cable • Hi-level Input Wire • Mounting Hardware Technical Specs: • Phase Shift Switch: 0 or 180° • Adjustable Input Sensitivity: 0.12V-3.5V • 0 to +12dB Variable Bass Boost (@50Hz) • Low Pass Filter (50-150 Hz) • Fuse: 1x25A • Max Power: 900 watt • • THD: 14.4V • Slim Woofer: 150Watt • Product Dimension: 12.8" x 10.3" x 3.2" -inches www.PyleUSA.com 7