Pyle PTHDL160 User Guide - Page 1
Pyle PTHDL160 Manual
View all Pyle PTHDL160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PTHDL160 Temperature and humidity data logger Introduction: 1. Measure the temperature and humidity online or offline and record them. 2. USB connect to the corresponding software on computer. 3. After connection,read the digits on the computer or download the data. 4. Selectable measure intervals: (1-24)second,minute,hour. 5. Selectable measuring data number 6. Record 21000 temperature and humidity counts simultaneously. 7. LED lights indication. 8. Alarm function of temperature and humidity or set alarm value. 9. Long battery life. Specifications and parameters Temperature measurement range Temperature measurement accuracy Temperature display resolution Humidity measurement range Humidity measurement accuracy Humidity display resolution Using temperature Storage temperature Size Weight Battery -40℃~105℃(-40 ℉~221 ℉) ±1℃(±2 ℉) 0.1℃(0.1℉) 0% RH~100%RH ±3% RH 0.1% RH -40℃~105℃(-40 ℉~221 ℉) -40℃~125℃(-40℉~257℉) 106×24×24mm 25g( no battery) 3.6V The second step After you installed the software, please insert the instrument to the USB interface, next operations please see the diagram Description: 1. Lid 2. USB interface 3. Switch 9 1 4. Battery cover 5. Sensor 2 6. Card clasp, (press it, open the battery cover) 3 7. Alarm lamp (red/yellow) 8 7 8. Record lamp (green) 9. Product tray 4 6 5 The assembly of battery: The methods of battery installment are as follow: When working whether the data logger connect to USB or not,power needed. 1.Press the card clasp, pull out the battery cover. 2.Take out the battery cover. 3.Put in the battery. (the positive pole face to the USB interface) 4. Install the battery cover. The LED light: 1.Green light:working. If flashing, it is working. 2.Red and yellow lights: alarming. If flashing, the measuring data over range the alarm counts. About the flashing regulations of green/yellow/red lamp, refer to the chart below: Usage scenarios Green lamp Installing battery Start measuring flash 3times quick flash 2t USB communication quick flash 1t Recording data slow flash 2t interval time quick flash 1t Low temperature alarm High temperature alarm Low humidity alarm High humidity alarm Red lamp flash 3t flash 1t quick flash 2t Yellow lamp flash 3t slow flash 1t quick flash 2t Usage and maintenance: Installing the battery, connect USB with computer, after setting the digits by using the software, the product can be used. In the process of using, keep entilation clean. About the set of products, please refer to: Help document of communication software. Press the " NEXT" button all the time can be finished the installment. 4 5 We can read the correct datas according to the arrow indicate method. 6