Pyle PTCDCS32BT User Manual - Page 9
the PTCDCS32BT host cabinet in the correct position. Rotate one screw
 |
View all Pyle PTCDCS32BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7.) Look at Fig7. Match the holes on the U-type(B} bracket according with the holes on the PTCDCS32BT host cabinet as shown. Rotate clockwise four screws D(H) into the holes on the sides and one screw B(F) inot the middle and tighten. 8.) Look at Fig8. It shows the assembled PTCDCS32BT host cabinet with the U-type bracket (B) apparatus. 9.) Look at Fig9. Nest the assembled big horn speaker (A) into the tubing of the PTCDCS32BT host cabinet in the correct position. Rotate one screw B(F) clockwise into the hole. Tighten clockwise with a Philip's head screwdriver. It should be able to be turned freely by rotating the big horn speaker lightly. 8 www.PyleUSA.com
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
 |
 |
www.PyleUSA.com
8
7.)
Look at Fig7. Match the holes on the U-type(B} bracket according with the
holes on the PTCDCS32BT host cabinet as shown. Rotate clockwise four
screws D(H) into the holes on the sides and one screw B(F) inot the middle
and tighten.
8.)
Look at Fig8. It shows the assembled PTCDCS32BT host cabinet with the
U-type bracket (B) apparatus.
9.)
Look at Fig9. Nest the assembled big horn speaker (A) into the tubing of
the PTCDCS32BT host cabinet in the correct position. Rotate one screw
B(F) clockwise into the hole. Tighten clockwise with a Philip's head
screwdriver.
It should be able to be turned freely by rotating the big horn
speaker lightly.