Pyle PSWDV60GN PSWDV60BK Manual 1 - Page 6

8.0 Dive Mode - Precaut ion and Dive Mode water sensor Dive Mode Precaution ! DO NOT press any key after going into water, it will cause water leakage. Check the Watch's battery level prior to start a dive. If the low battery indicator ' ' appear, replace the battery with a new one. ! If moisture is escalated around the water sensor, it may activate the Dive Mode unintentionally. To prevent this to happen, dry the water sensor with a soft cloth when the water sensor is wet. current water temperature sea water or lake water diving indicator current water depth dive status indicator elapsed dive time maximum reached water depth Dive Mode (Submerge Display) Normal Time Mode (Year Display) reached to the water depth approximate to 1.5 m (4.92 ft) reached to the water depth approximate to 1.5 m (4.92 ft) ! If dirt is escalated around the water sensor, it may prevent the Watch to switch to Dive Mode automatically when you are diving. To prevent this to happen, clean the water sensor with a soft cloth prior to start a dive. Dive Mode ! The Dive Mode will appear automatically if the user submerge, and reached the water approximate to 1.5 m (4.92 ft). When the user emerge, and returned to the water approximate to 1.5 m (4.92 ft), the Normal Time Mode restarts automatically. ! When the Dive Mode appear, the following will be displayed: 1) the Current water depth, 2) the Current water temperature, 3) the Maximum reached water depth, 4) the Dive Status Indicator, and 5) the Elapsed Dive Time. 8.1 Dive Mode - Dive Status Indi cator, Auto Back Light and Dive Site Select ion Dive Status Indicator and Alarm submerge stay-in emerge Dive Status Indicator ! This Watch includes three Dive Status Indicators, they are the Submerge, Emerge and Stay-In. They will flash on the display as follows: 1. Submerge Indicator: if the user submerge at a rate more than or equal to 10 meters per minute, the indicator will flash. 2. Emerge Indicator: if the user emerge at a rate more than or equal to 6 meters per minute, the indicator will flash and the auto alarm will beep. 3. Stay-In Indicator: If the user is neither 'emerge' nor 'submerge', the Stay-In indicator will flash. Sea and Lake Dive SEA indicator ON LAKE indicator ON Auto back light indicator ON ! This Watch can work either in sea water or lake water. Set 'SEA' for sea water diving or set 'LAKE' for lake water diving. ! Check the coming '8.5 To Set the Dive mode' for more detail of how to set the diving site setting. Automatic Back Light 1. back light is OFF 2. tilt the wrist and hold 3. tilt the wrist back, that position for the back light turn ON about 2 seconds automatically for 5 seconds Automatic Light Function ! Dive Mode includes an automatic light function for user's convenience. If the automatic Back Light functions is set to ON, the following moves will activate the back light. 1) The user tilts his/her wrist and hold that position for 2 seconds, 2) tilts the Watch back, 3) the back light will turn ON for 5 seconds. ! Check the coming '8.5 To Set the Dive Mode' for more detail of how to activate the automatic light function. 8.2 Dive Mode - Dive Record for a Single Dive (Case A) 0 m 1.5 m normal watch operations d 1 elapsed dive time (t1) one dive record 100 m Dive Mode operations dive record updated 0 t1 water t 1 >10' depth time Elapsed Dive Time for New Dive Dive Mode (Submerge Display) record 1 record 2 Dive Record current dive facts Acquire a new record record 1 record 2 record 3 Dive Record Dive Record for a Single Dive (Case A) ! If the user finished a dive (d1), the following dive facts of d1 will be stored into the Watch when the user come to a complete stop (returned to the surface for more than 10 minutes). 1. The Elapsed Dive Time, 2. The Maximum Reached Watch Depth, 3. The lowest Water Temperature, and 4. The Date and the Starting Time of the dive. ! User can store up to 10 dive records, and user can recall the dive record(s) in a later day. ! Check the coming '9.0 Dive Record Recall Mode' for more detail of how to recall dive record. NOTE: If a new dive record is acquired, this record will become the record 1, and the former record 1 will become the record 2. The other records will shift it's location in the similar manner. Acquire a New Dive Record 8.3 Dive Mode - Dive Record for Subsequent Dives (Case B and C) 0 m 1.5 m normal watch operations d 1 normal watch operations d 2 100 m water 0 depth Dive Mode operations < 10' Dive Mode operations dive record stored t1 t1 t1 t2 t1+t2 >10' time d1 and d2 will be stored into 1 record Elapsed Dive Time for Subsequent Dive (Case B) 0 m 1.5 m normal watch operations d 1 normal watch operations d 2 normal watch operations d 3 100 m water 0 depth Dive Mode operations t 1 < 10' t1 t1 Dive Mode Dive Mode operations < 10' operations dive record stored t 2 t1+t2 t1+t2 t 3 t1+t2+t3 >10' time d1, d2 and d3 will be stored into 1 record Elapsed Dive Time for Multiple Dives (Case C) Dive Record for a Subsequent Dive (Case B) ! If the user has finished a dive (d1), and this user starts another dive (d2) within 10 minutes, the Watch will stored the previous dive (d1) and the subsequent dive (d2) into a single record when the user come to a complete stop (returned to surface for more than 10 minutes). ! Check the coming '9.0 Dive Record Recall Mode' for more detail of how to recall dive record. Dive Record for Multiple Subsequent Dives (Case C) ! If the user has engaged in a multiple dive (d1,d2 and d3), and every subsequence dive starts right within the 10 minutes interval after the previous dive has finished, the Watch will stored that series of dives (d1,d2 and d3) into a single record when the user come to a complete stop (returned to surface for more than 10 minutes). ! Check the coming '9.0 Dive Record Recall Mode' for more detail of how to recall dive record.