Pyle PLMCA40 User Manual - Page 5

OPERATION INSTRUCTION First Time to Use the System Connect the loudspeakers to the L-SP, R-SP RCA jacks on the rear panel. Connect an external source to the AUX jack on the rear panel ( if there is). Connect the power cable to 12VDC power supply and plug the connector into the jack marked DC IN 9~16V Turn on/Turn off the system Pressing the button POWER on the front panel for more than 2s, the system will be turned on and ready for operation*. Pressing the button POWER again for more than 2s will turn off the system. *Note: The system will memorize and recall the last state of operating mode (FM radio /AUX/USB /SD) . Select an Operation Mode Pressing the button MODE on the front panel can change the mode from one to other(FM Radio-AUX-USB--SD mode) and select one of the mode you like. Note: USB and SD modes are active only when a device is connected to the USB port/SD slot. Volume Control Pressing the button + or - for more than 2s at any state, the system will be ready for the volume control with the range of 0~31 displayed on the screen. Adjust it to your desired setting without audio distortion. Note: The worlds VOL will be displayed on LCD screen during adjusting system volume. 4 MUTE Function Pressing the button MUTE for more than 2s will mute sounds from the outputs of the system at any state and disable it by pressing button MUTE again for more than 2s. Note: will be blinking on the LCD when in MUTE state. USB/SD Mp3 Automatically Playing Function The system will play Mp3 format songs automatically when an USB flash memory/SD card applied to the USD port/ SD slot on the front panel at any state. 1) Pressing the button to select last or next song. 2) Pressing the button will pause the music playing and disable it by pressing it again. 5