Pyle PLINK4 Instruction Manual - Page 3

Hardware Before installing PLINK4 Video Capture Card, make sure your computer has a free PCI-E X1 slot. Before you get started, make sure your PC is shut down. Then disconnect all the cables from the back of the computer. Only begin this process when everything is disconnected. Remove the cover on the PC. After you identify a PCIe slot, unscrew the small metal bracket attached to the computer case directly behind the PCIe slot. Gently yet rmly, slide the video capture card into the PCIe slot, making sure it's fully locked down. Screw the card into the back of the case so that the inputs and outputs are exposed on the back of the computer case. Place the panel on the case, put the screws back in, and stand the case upright. Plug all the cables back into the case. Power on the PC. System will automatically recognize the game capture card, and you will see the device name "Pyle LiveGamer PLINK4" in the Device Manager, which means that the device is ready to work. Note: We don't recommend using the device on Windows 7 system, but if you need, please download the driver and install it. http://www.cddownload.top/ezcap323win7driver.zip Software For professional live streaming or recording, we suggest use OBS, download link: https://obsproject.com/ Note: PLINK4 Video Capture Card also can work with Mac Pro, and please download OBS Mac version. The operation is similar as working under Windows as below. www.PyleUSA.com 3