Pyle PLD27 PLD27 Manual 1 - Page 13

SETUP NOTE: For audio CD, the play interface and operation is similar with the Music page operation. For details, please refer to the description of Music page above. MEMORY CARD OPERATION There is a memory card interface on the front panel of the unit. Using the SD/MMC card: 1) When insert memory card into the memory card interface, the unit will read the card automatically. 2) If the memory card have been inserted into the unit. Press MODE button to select the SD card mode. Then the SD/MMC card will be read. Note: When reading the memory card, please don't touch or take out the card. If following the instruction above, the unit can't read the card, please check if the card is in good condition, or take out the card then insert it into the card interface once more. USB PLAY OPERATION On the front panel of the unit, there is an USB interface. An USB driver can be connected through this interface. 1) When insert USB drive into the USB interface, the unit will read the USB automatically. 2) If the USB have been inserted into the unit. Press MODE button to select the USB mode. Then the USB will be played. good condition, or tack out the USB then insert it into the USB interface once more. • The main unit can only support the standard USB-memory disc which is approved by Microsoft. • USB MP3 player is not a standard which means different brand name or different models have their own standard. So our product cannot support every MP3 player. • When connecting an MP3 player and there has normal battery in the player (non rechargeable battery), you should remove the battery from the MP3 player then connect it to SETUP the USB interface. Otherwise, it may cause battery burst. • When in USB play mode, be sure not to remove the USB driver from the USB interface. In DVD mode, when the disc is playing or in the stop mode, press SETUP on the remote control to enter setup menu. • When the cursor is on the topside, use . :buttons to move between the different pages. • Press button to move the cursor to the setup page below and then you can use buttons to move between the different setup options. • Press button to display the choice list for each setup option and then use buttons and ENTER button to change your selection. Note : When reading the USB device, please don't touch or take out the USB. If following the instruction above, the unit can't read the USB, please check if the USB is in SYSTEM SETUP When you open the setup menu, you will see the system setup page at first, see below: SYSTEM SETUP 13