Pyle PLCD43MRB User Manual - Page 5
Wiring Connections, CAUTION
![]() |
View all Pyle PLCD43MRB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INSTALLATION DIAGRAM HEX NUT SPRING WASHER PLAIN WASHER TAPPING SCREW DASH BOARD HEX NUT CONSOLE MOUNTING SLEEVE HEX BOLT - Only use speakers with 4 ohms impedance. - Do not attach the control panel to the chassis before wiring is complete. - The maximum current of the auto antenna is 200mA. Wiring Connections WIRING DIAGRAM Radio Antenna Socket White: Left CH Auxiliary RCA Audio Input Red: Right CH Auxiliary RCA Audio Input White: Front Left CH RCA Audio Output Red: Front Right CH RCA Audio Output Red: Rear Right CH RCA Audio Output White: Rear Left CH RCA Audio Output CAUTION +12V DC NEGATIVE GROUND Rear Right Speaker Front Right Speaker Purple Purple / Black Gray Gray / Black FUSE 15A Green Green / Black White White / Black ACC (Red) GND(Black) ANT(Blue) Power B+(Yellow) Rear Left Speaker Front Left Speaker Removal of the Main Unit 1. Remove the metal strap from the main unit. 2. Remove the plastic trim out from the main unit. 3. Insert a bracket key into the left and right side of the main unit and draw the unit out of the mounting sleeve. - 4 -
![](/manual_guide/products/pyle-plcd43btm-user-manual-60b398f/5.png)