Pyle PKCWC12 Instruction Manual - Page 7

Viii. Trouble Shooting

Page 7 highlights

VIII. TROUBLE SHOOTING PROBLEM The wine cooler will not operate The wine cooler is not cold enough The wine cooler vibrates while operating POSSIBLE CAUSES AND MAINTENANCE MEASURES ● The unit may be plugged in using a di erent voltage. Also, the circuit breaker may be tripped or there is a blown fuse. ● Check the temperature control settings, as the external environment may be too hot and a ect the cooling capacity. The most ideal ambient temperature for compressor cooling wine cooler is 5C-32C (41F-90F). ● The door may be opened too frequently. ● The door is not closed completely. ● The door seal does not seal properly. ● The wine cooler does not have su cient clearance, as it will a ect the heat dissipation. Please make sure there is nothing near Heat sink fan on the back within 10cm area. ● The wine cooler includes too much items, as the IT need some time to cool down and remain stable. Please wait for 24h and check again. ● Make sure the unit is leveled. Please adjust the foot if necessary The wine cooler produces a lot of noise ● The unit may not be leveled. ● Check the fan, as noise will increasing if your wine cooler have much dust on the fan after using for a long time. Please use hair dryer and set strong position to blow away dust on the fan. The wine cooler will not close properly ● The unit may not be leveled. ● The doors are reversed and not properly installed. ● The seal is weak. The LED display does not work There is an LED display error The buttons do not function Frost or ice developed inside the wine cooler ● There may be a problem with the main control board. ● There is a problem with the plug. Please check to assure plug is be in good connection with socket or already plugged in. ● The digital control panel will lock automatically after 10 seconds if no further operation Please press the unlock button to activate the wine cooler. ● There is a PCB problem. ● The temperature control panel may be damaged. ● Ambient temperature too low. ● The wine cooler needed to be restarted Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: [email protected] This product can expose you to a chemical or group of checmicals, which may include "Styrene" which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/. www.NutrichefKitchen.com 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

VIII. TROUBLE SHOOTING
www.NutrichefKitchen.com
7
Questions? Issues?
We are here to help!
Phone:
(1) 718-535-1800
Email:
This product can expose you to a chemical or group of checmicals, which may include
”Styrene”
which is known in the state of California to cause cancer, birth defects, or other
reproductive harm. For more info, go to
.
PROBLEM
POSSIBLE CAUSES AND MAINTENANCE MEASURES
The wine cooler will not operate
The unit may be plugged in using a different voltage. Also,
the circuit breaker may be tripped or there is a blown fuse.
The wine cooler is not cold enough
Check the temperature control settings, as the external
environment may be too hot and affect the cooling capacity.
The most ideal ambient temperature for compressor cooling
wine cooler is 5C-32C (41F-90F).
The door may be opened too frequently.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have sufficient clearance, as it will
affect the heat dissipation. Please make sure there is nothing
near Heat sink fan on the back within 10cm area.
The wine cooler includes too much items, as the IT need
some time to cool down and remain stable. Please wait for
24h and check again.
The wine cooler vibrates while
operating
The wine cooler produces
a lot of noise
The wine cooler will not
close properly
The LED display does not work
There is an LED display error
The buttons do not function
Frost or ice developed
inside the wine cooler
Make sure the unit is leveled.
Please adjust the foot if necessary
The unit may not be leveled.
Check the fan, as noise will increasing if your wine cooler
have much dust on the fan after using for a long time.
Please use hair dryer and set strong position to blow away
dust on the fan.
The unit may not be leveled.
The doors are reversed and not properly installed.
The seal is weak.
There may be a problem with the main control board.
There is a problem with the plug. Please check to assure
plug is be in good connection with socket or already
plugged in.
The digital control panel will lock automatically after
10 seconds if no further operation Please press the
unlock button to activate the wine cooler.
There is a PCB problem.
The temperature control panel may be damaged.
Ambient temperature too low.
The wine cooler needed to be restarted