Pyle PINV6 PINV4 Manual 1 - Page 5
Caution
![]() |
View all Pyle PINV6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
-The LED indicators A. GREEN : It indicates the inverter is power on, the cooling fan (PINV4/ PINV5 / PINV6) is also activated, and AC power will be delivered to the AC outlet. B. RED : It indicates the inverter shutdown caused by low voltage, overload, or excessive temperature. -The ON/OFF switch It enables output AC power at the AC outlet when switched ON. It also acts as a manual reset for overload, low battery voltage and overheat fault conditions. Reset occurs by switching OFF for 5 seconds after automatic shout down then back ON again. This manual reset feature prevents unexpected or hazardous restarting of connected AC loads. -The AC outlet Single and dual AC outlets are provided on one end of the PINV4, PINV5 and PINV6, make sure of the power consumption required before plug in: When operated from the directly connection to a 12 Volt battery (PINV4 / PINV5 / PINV6) Any combination of 115 Volt AC products with a total power consumption of 600 Watts or less for PINV4 / PINV5 / PINV6 CAUTION: • Do not connect to AC DISTRIBUTION WIRING. The inverter is designed for connection directly to standard electrical and electronic equipment. • Do not connect the inverter to household or RV AC distribution wiring. • Do not connect the inverter to any AC load circuit in which the neutral conductor is connected to ground (earth) or to the negative of DC (battery) source. 4
![](/manual_guide/products/pyle-pinv4-pinv4-manual-1-f420ec4/5.png)