ProForm 950 Elliptical English Manual - Page 11
How To Adjust The Stride Of The Elliptical
View all ProForm 950 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER HOW TO ADJUST THE STRIDE OF THE ELLIPTICAL EXERCISER To mount the elliptical exerciser, hold the handle and step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedal disks can turn in either direction. It is recommended that you turn the pedal disks in the direction shown by the arrow below; however, for variety, you can turn the pedal disks in the opposite direction. To adjust the stride of the elliptical exerciser, first pull one of the adjustment knobs until the adjustment bracket can be pivoted freely. Pivot the adjustment bracket until the adjustment knob is aligned with one of the three holes in the crank arm, and gently release the knob. Then, pivot the adjustment bracket back and forth slightly to make sure that the adjustment pin is engaged in one of the three holes in the crank arm. Handle Crank Arm Pedals Crank Arm Adjustment Bracket Adjustment Pin Holes Adjustment Knob Adjust the other side of the elliptical exerciser in the same way. To dismount the elliptical exerciser, wait until the pedals come to a complete stop. Note: The elliptical exerciser does not have a free wheel; the pedals will continue to move until the flywheel stops. When the pedals are stationary, step off the highest pedal first. Then, step off the lowest pedal. 11