Polk Audio LEGEND L200 User Guide 1 - Page 6

Listening in 5.1 Surround, Listening in 7.1 Surround

Page 6 highlights

Listening in 5.1 Surround You can use the Legend Series speakers as rear surround speakers in a Polk Audio home theater surround system. Ideal rear channel surround speaker placement is along a side wall, slightly behind and above the listening position. Note: If you cannot place rear surrounds along the side walls, position them along the rear wall above the listening position. FRONT LEFT SUB TV FRONT RIGHT CENTER 90º 20º REAR LEFT SURROUND 90º 20º REAR RIGHT SURROUND Rubber Feet and Adjustable Floor Spikes Rubber feet and floor spikes are included with your Legend L600 floor-standing loudspeakers to anchor and stabilize the speaker on any type of floor. In order to expose the spike, simply pull the rubber feet off. Adjusting the Floor Spikes The floor spikes can be adjusted from below and require two hands. Note: If the speaker is stable on the floor, no adjustment is necessary. If the speaker is unstable, follow these steps: 1. The speaker will be inclined to settle on three of the four spikes leaving one spike slightly off the floor. 2. Determine which spike needs to be adjusted. 3. Turn the spike clockwise to lower, and counterclockwise to raise it. Lock the washer to tighten and secure the foot. 4. As the spike contacts the floor, it will become more difficult to turn. At that point the speaker should be stabilized. 5. Tighten lock ring to prevent the spike from loosening over time. Listening in 7.1 Surround Enjoy added depth to your surround sound experience with four rear surround speakers instead of two. FRONT LEFT SUB TV FRONT RIGHT CENTER 90º 20º REAR LEFT SURROUND BACK LEFT SURROUND 90º 20º REAR RIGHT SURROUND BACK RIGHT SURROUND 1. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

6
Listening in 5.1 Surround
You can use the Legend Series speakers as rear surround
speakers in a Polk Audio home theater surround system. Ideal
rear channel surround speaker placement is along a side wall,
slightly behind and above the listening position.
Note: If you cannot place rear surrounds
along
the side walls,
position them
along
the rear wall above the listening position.
Listening in 7.1 Surround
Enjoy added depth to your surround sound experience with
four rear surround speakers instead of two.
Rubber Feet and Adjustable Floor Spikes
Rubber feet and floor spikes are included with your Legend
L600 floor-standing loudspeakers to anchor and stabilize the
speaker on any type of floor. In order to expose the spike,
simply pull the rubber feet off.
Adjusting the Floor Spikes
The floor spikes can be adjusted from below and require
two hands.
Note: If the speaker is stable on the floor, no adjustment is
necessary. If the speaker is unstable, follow these steps:
1.
The speaker will be inclined to settle on three of the four
spikes leaving one spike slightly off the floor.
2.
Determine which spike needs to be adjusted.
3.
Turn the spike clockwise to lower, and counterclockwise
to raise it. Lock the washer to tighten and secure the foot.
4.
As the spike contacts the floor, it will become more
difficult to turn. At that point the speaker should
be stabilized.
5.
Tighten lock ring to prevent the spike from loosening
over time.
90º
TV
90º
20º
20º
SUB
REAR LEFT
SURROUND
REAR RIGHT
SURROUND
CENTER
FRONT
LEFT
FRONT
RIGHT
90º
90º
20º
20º
TV
SUB
REAR LEFT
SURROUND
BACK LEFT
SURROUND
BACK RIGHT
SURROUND
REAR RIGHT
SURROUND
CENTER
FRONT
LEFT
FRONT
RIGHT