Pioneer HTZ-7 VisionPlus Service Manual - Page 114
TEST MODE, DVD Center Unit HTZ-C7
![]() |
View all Pioneer HTZ-7 VisionPlus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
HTZ-7, HTZ-C7, HTZ-SW7 13 × 2 The AC-3 unit also can be removed without removing the bridge, but in this case, a screwdriver of 15 cm or more should be used for the bit part. Bridge 14 × 1 AC-3 Unit 14 × 1 15 × 2 Bridge 17 AMP Assy mounting screw Top: × 8 Side: × 5 × 2 × 2 × 2 × 2 AMP ASSY CN3027 16 × 2 7.2.4 TEST MODE DVD Center Unit (HTZ-C7) 1. Entry into test mode Perform power ON after short-circuiting the "TEST MODE" pin of the MOTHER assy during power OFF or transmit "ESC+TEST" with the test mode remote control unit (GGF1067). The power will be switched on and AV controller test mode will be entered. The standby LED of the main unit flashes during AV controller test mode. (Refer to Fig. 1.) MOTHER ASSY W5030 W5029 GGF1067 Test mode remote control unit OR ESC TEST Front I MOTHER ASSY SIDE B Fig. 1 Entry into test mode W5030 W5029 114
![](/manual_guide/products/pioneer-htz7-visionplus-service-manual-488489e/114.png)