Pioneer HTZ-55DV Owner's Manual - Page 3

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However, the method of connecting and operating the unit is the same. Line Voltage Selector Switch Only multi-voltage models are provided with this switch. There is a Voltage Selector. Australian model is not provided with this switch. Be sure this is set correctly. Mains voltages in Saudi Arabia are 127 V and 220 V only. Always check that this selector is set properly before plugging the power cord into the wall outlet. 1. Disconnect the power cord. 2. Use a small-sized screwdriver (flat blade). 3. Insert the screwdriver into the groove on the voltage selector, and adjust the voltage selector. Installation Precautions • Install components so that there are no obstructions above or either side of them, or by ventilation holes. Also install 10cm away from the wall as shown in the figures. Components feature ventilation holes on the bottom so do not install on thick pile carpets or other surfaces that may block them. • Use a vacuum cleaner periodically to clean the port of the subwoofer to keep it free of dust. 110V -127V 220V -230V 240V CAUTION DISCONNECT POWER SUPPLY CORD, BEFORE CHANGING THE VOLTAGE VOLTAGE SELECTOR CAUTION 240V Power source voltage is factory adjusted 240 volts. If your area is different, change voltage selector setting. Powered subwoofer unit (S-DV55SW) 25 cm (10 in.) or more DVD Tuner system (XV-DV55) 10 cm (4 in.) or more 10 cm (4 in.) or more Rear: 10 cm (4 in.) or more 25 cm (10 in.) or more Rear: 10 cm (4 in.) or more 10 cm (4 in.) or more 3 En