Pfaff ambition 155 Anniversary Edition Manual - Page 22

Buttons

Page 22 highlights

9 10 11 12 13 14 15 1 2 3 4 Preparations 5 6 7 8 Buttons 1HHGOHXSGRZQZLWKLQGLFDWRU  Press this button to move the needle up or down. The setting of the needle stop position is changed at the same time. The indicator is lit when needle down is activated.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

22
Preparations
Buttons
Press this button to move the needle up or down.
The setting of the needle stop position is changed
at the same time. The indicator is lit when needle
down is activated.
the needle.
When having stopped sewing in the middle of
a stitch, press stitch restart to start sewing at the
beginning of the stitch again without having to
reset any special settings you have made.
If pressing the stitch restart button while sewing,
then stop.
Press the tie-off button while sewing and your
machine sews a few tie-off stitches and stops
automatically.
The speed control lever sets the maximum sewing
speed. To increase sewing speed, slide the lever to
the right, to decrease sewing speed, slide the lever
to the left.
Press this button to start or stop the machine
without using the foot control. Press the button
once to start and press it again to stop.
For permanent reverse, press the button before
and the machine sews in reverse until you press
the button again to cancel.
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed. The reverse indicator is lit when
the reverse button is pressed.
Reverse is also used when sewing programmed tie-
off end and darning stitches.
The programmed tie-off indicator is lit to indicate
that one or several tie-off options are activated. The
indicator stays lit until the tie-off options are no
longer in use.
change the density for the selected stitch.
change the stitch position.
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
16
17
18 19 20 21