Pentax AF360FGZ Operation Manual - Page 50
Keep the distance from the built-in flash unit and, AF360FGZ to the subject within 4 meters. - flash af
![]() |
UPC - 027075121041
View all Pentax AF360FGZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5 Set the zoom position to suit the subject and place the flash unit at the desired location. ● When setting up a flash unit separately from the camera, use the off-camera shoe adapter F when using a tripod, or the off-camera shoe clip CL-10 when setting up in another location such as tabletop, chair, etc. 6 Turn the flash unit on the camera on. ● If the camera's built-in flash unit is part of the combination, pop up the built-in flash unit. 7 Check that the ready lamp is lit, then take the picture. ● When charging is complete, ( ) is lit in the viewfinder of the camera. The ready lamp is lit on the AF360FGZ. ● Position the slave unit(s) so that the slave sensor can receive the flash discharged by the camera's built-in flash unit or attached flash unit. ● The AF360FGZ will discharge at the same time that the camera's flash discharges. ● Keep the distance from the built-in flash unit and AF360FGZ to the subject within 4 meters. ● The slave unit will turn off automatically after about 1 hour of non-operation when the auto power off function is set. 48 ● Do not use red-eye reduction with the camera's flash. This will result in the AF360FGZ firing by the pre-flash. For the same reason, set the camera to manual focus when firing the flash continuously so that the AF spotbeam does not operate with cameras that have AF spotbeam functions.
![](/manual_guide/products/pentax-af360fgz-operation-manual-56f8473/50.png)