Paradigm PW 600 Premium Wireless Series Manual - Page 18
Updates, Reboot Power Cycle &, Factory Reset, Enable/disable Auto, Input Mode
View all Paradigm PW 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
UPDATES DTS Play-Fi® App Update: If the DTS Play-Fi® app on your device requires an update, the app will notify you that an update is available and guide you through the update process. Paradigm Firmware Update: At Paradigm we constantly strive to improve the performance and functionality of your system, as a result from time to time your Paradigm Premium Wirless Series product will require firmware updates. Please regularly check our website at www.paradigm.com for the latest firmware updates. REBOOT (POWER CYCLE) & FACTORY RESET Reboot (Power Cycle): PRESS and HOLD the Power button ( ) for 3 seconds. The Mute button ( ) will start blinking once a refresh has been achieved; upon releasing the button a tone will verify a refresh. Factory Reset: PRESS and HOLD the Power button ( ) for 10 seconds (at 3 seconds the Mute button ( ) will start blinking); once you hear a tone (at 10 seconds) to verify a reset, immediately release the reset button. ENABLE/DISABLE AUTO INPUT MODE Paradigm PW products can be configured to automatically select the AUX input when the Play-Fi app is turned off. This mode can be useful when using the PW product to improve TV audio, for example, through the AUX input when wireless music streaming 16 is not in use. To enable auto input mode, hold the input button for five seconds. Hold it again for five seconds again to cancel.