Panasonic WJND200 WJND200 User Guide - Page 37
Settings relating to the terminal alarm [Terminal Setup], Step 1, REC CAM], PRESET], Output Terminal]
![]() |
View all Panasonic WJND200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Settings relating to the terminal alarm [Terminal Setup] Set event actions at a terminal alarm occurrence. Screenshot 1 Click the [Event] button in the "Setup" panel then click the "Terminal Setup" tab. The "Terminal Setup" page will be displayed. Note: Action to be taken at a command alarm occurrence will be affected by this setting. Step 1 Perform the settings for the following items for each terminal alarm channel. [REC CAM] Performs the settings for a camera channel used for recording. [PRESET] Enter the preset position (1 - 256) to which the camera will move at a terminal alarm occurrence for each terminal. When no position is selected (blank), the camera does not move to any preset position. [Output Terminal] Select the output terminal (--, TRM1 - TRM16) that outputs alarm signals at a terminal alarm occurrence. When "--" is selected, alarm signals will not be output. Step 2 Click the [SET] button after completing the settings. 37
![](/manual_guide/products/panasonic-wjnd200-wjnd200-user-guide-de05250/37.png)