Panasonic SV-AV20A SVAV20U User Guide - Page 10
POWER SUPPLY, Using AC Adaptor, Charging the Battery
![]() |
View all Panasonic SV-AV20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Power Supply ª Using AC Adaptor 1 Connect the AC Adaptor to AC Main socket. 1 2 Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. ª Charging the Battery 1 While holding the [ ] part, slide 1 it to remove the Battery Compartment Cover. 2 Press the terminals of the battery onto the terminals of the Battery Compartment and set the battery. 2 ≥Fit the battery with its label facing upward. ≥After the battery is set, close the cover. 3 Connect the AC Adaptor to AC Main socket. 4 Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device. ≥Power Lamp flashes, and Charging starts. ≥When recharging, turn the power of the SD Multi AV Device off. 5 Wait until Power Lamp 1 goes off. ≥When recharging is completed, Power Lamp goes off. ≥If the Power Lamp flashes quickly (or slowly) when recharging, recharging is not normal. (l 49) 3 DC IN 4.8V 2 1 DC IN 4.8V 4 10
![](/manual_guide/products/panasonic-svav20u-svav20u-user-guide-184350a/10.png)