Panasonic SABTT750 SABTT350 User Guide - Page 10

STEP 1 : Preparing the speakers Assembling the speakers [BTT750] Caution ≥ Do not stand on the base. Be cautious when children are near. ≥ When carrying speakers, hold the stand and base parts. Preparation ≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥ For wall mount, refer to page 41. ≥ Keep the screws out of reach of children to prevent swallowing. 2 Front speakers 2 Stands (with cables) 2 Bases 4 Screws A A 2 Screws B B 1 Back of the base Pull the cable straight along the line and slide into the groove. Screw A Tighten securely. 2 2 Insert the wire fully. r: White s: Blue line Push! 1 Press into the groove. Screw B Tighten securely. Leave about 80 mm (3 5/32q) ∫ Preventing the speakers from falling ≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers. ≥Use a string of less than ‰ 2.0 mm (3/32q), which is capable of supporting over 10 kg (22 lbs). A String (not supplied) Thread from the wall to the speaker and tie tightly. B Rear of the speaker C Screw eye (not supplied)  D Wall E Approx.150 mm (5 29/32q)     VQT2W18 10