Panasonic PT-MZ13KL SPEC FILE - Page 12

TENTATIVE LCD Projectors PT-MZ13KL Notes on projector placement and operation 1. Never place objects on top of the projector while it is operating. 2. Make sure there is the unobstructed space as shown below or more around the projector's exhaust openings. In addition to this space, also ensure that there is a suf cient work space for removing and installing lter and other parts. 3. Make sure that nothing blocks the projector's air intake and exhaust openings. Also, install the projector so that cool or hot air from other air conditioning equipment does not ow directly toward the projector's air intake or exhaust openings. 4. Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed space, add a separate ventilation system. If ventilation is insuf cient, hot air will accumulate at the intake opening. This may cause the projector's protective circuit to interrupt projector operation. 500 mm (19-11/16") or longer 500 mm (19-11/16") or longer 1 000 mm (39-3/8") or longer 100 mm (3-15/16") or longer Dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. PJLink™ is a registered trademark or pending trademark in Japan, the United States, and other countries and regions. HDBaseT™ is a trademark of the HDBaseT Alliance. All other trademarks are the property of their respective trademark owners. As of July 2019 MZ13KLG_STM_T01_29/07/2019 12/12