Panasonic PT-F200U Operating Instructions - Page 10

Preparation Read this first Minimum required setting screen When you start the projection for the first time, the minimum required setting screen for projection will be displayed. J LANGUAGE Select the required language setting. LANGUAGE INSTALLATION Press I H buttons of the Remote control or Control panel on the projector to select the required installation method. Press G to proceed to the ALTITUDE setting. PLEASE SELECT LANGUAGE SELECT ENTER Press F G I H buttons of the Remote control or Control panel on the projector to highlight the required language, and press ENTER to proceed to the next setting. J OPTION Select the current projection method and fan speed setting. If you need return to the previous setting, press the RETURTN button. OPTION INSTALLATION ALTITUDE SELECT FRONT/DESK LOW RETURN ENTER FRONT/DESK FRONT/CEILING REAR/DESK REAR/CEILING Setting on a desk/floor and projecting from front Mounting in the ceiling and projecting from front Setting on a desk/floor and projecting from rear Mounting in the ceiling and projecting from rear ALTITUDE If you use the projector at high elevation, the ALTITUDE setting need to be HIGH to set the fan speed high. Press I H to select the required option. If you need to return to the INSTALLATION, press F. LOW The fan speed is low. HIGH The fan speed is high. NOTE: • At 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, the setting must be HIGH. • The loudness of fan noise depends on the ALTITUDE setting. Press the ENTER button to start the projection. Once you finish the minimum requirement setting, it will not be displayed again unless the projector is initialized. See "INITIALIZE ALL" on page 36. You can change the settings from the MAIN MENU. See "Menu Navigation" on page 27. ENGLISH - 10