Panasonic PT-EX500U Operating Instructions Advanced - Page 51
AUTO PC adjust, Auto PC adj
![]() |
View all Panasonic PT-EX500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
AUTO PC adjust Select [PC adjust] from the Main Menu (see "Navigating through the menu" on page 46), then select the item from the sub-menu. Remote Control Side Control Auto PC adj. Auto PC adjustment function is provided to automatically adjust [Fine sync], [Total dots], [Position H] and [Position V] to conform to your computer. Press ▲▼ to select [Auto PC adj.] and then press the button. zz[Please wait...] appears while the Auto PC adjustment is in process. To store adjustment parameters The adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1-10) in the PC System Menu (see page 49). See also [Store] on page 53. Attention zz [Fine sync], [Total dots], [Position H] and [Position V] of some computers cannot be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (Æpages 52-53). zz The Auto PC adjustment cannot be operated when [480i], [576i], [480p], [576p], [720p], [1 035i] or [1 080i] is selected in the PC System Menu (Æpage 50), or when the signal is coming from the HDMI or DVI-D terminal. ENGLISH - 51 Settings
![](/manual_guide/products/panasonic-ptew530u-operating-instructions-advanced-2a94396/51.png)