Panasonic LUMIX G100|4K DC-G100 Operating Manual - Page 443
Storing on a Recorder, Connect the camera and recorder with the USB, connection cable., Press
View all Panasonic LUMIX G100|4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 443 highlights
Storing on a Recorder 15. Connecting to Other Devices By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: • Turn on the camera and recorder. 1 Connect the camera and recorder with the USB connection cable. (433) 2 Press to select [PC(Storage)] and then press . 3 Operate the recorder to store the images. • If [USB Mode] is set to [PC(Storage)] in the [Setup] menu, the camera will be automatically connected to the recorder without the [USB Mode] selection screen being displayed. (357) • Take care not to turn off the camera while storage is in progress. • Images such as 4K videos may not be supported depending on your recorder. • Turn off the camera and disconnect the USB connection cable before removing the card from the camera. Otherwise, the recorded data may be damaged. • For the storage and playback procedures, refer to the operating instructions for the recorder. 443