Panasonic KXTG4223 KXTG313SK User Guide - Page 33
Error messages, Troubleshooting, General use
View all Panasonic KXTG4223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Useful Information Error messages Display message Busy Error!! No link to base. Reconnect main base AC adaptor. Cause/solution R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R There is no handset registered to the base unit matching the handset number you entered. R Recording was too short. Try again. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset's registration may have been canceled. Re-register the handset (page 21). Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit's AC adaptor, then reconnect the base unit's AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 9). R Fully charge the batteries (page 9). R Check the connections (page 9). R Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 21). For assistance, please visit http://www.panasonic.com/help 33