Panasonic DMCFZ3PP Digital Still Camera - Page 47
Taking Pictures Using Burst Mode
View all Panasonic DMCFZ3PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Recording pictures (basic) Taking Pictures using Burst Mode 1 Switch the burst mode setting to record pictures. 2016 19 ∫ Number of pictures recorded in burst mode Burst speed (pictures/ second)¢ Number of recordable pictures (pictures) 4 max. 7 max. 13 2 max. 7 max. 13 Depends on Depends on 2 the card the card capacity capacity ¢When the shutter speed is higher than 1/60 and the flash is not activated • In simple mode [ ], the burst speed is fixed to Low. (P36) : High speed ; : Low speed ; : No limit ; No display (canceled) • Keep pressing the shutter button fully to activate the burst mode. • If the flash is activated, you can record only 1 picture. • When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3. • You cannot take pictures with audio in the burst mode. • You cannot take pictures in the burst mode when the quality is set to [TIFF]. • When setting auto bracket and the burst mode simultaneously, auto bracket will be performed by default. • When the burst mode setting is set to no limit, the speed of taking pictures becomes slow during a recording in burst mode. • Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card. 47