Panasonic DMC-GX85 Advanced Owners Manual - Page 135

5. 4K Photo and Drive Settings Burst Mode ∫ Setting the burst rate After pressing 3 in step 2 on P134, press 2/1 to select the burst rate, and press [MENU/SET]. SH H M L LV LV [SH] (Super high speed) [H] (High speed) [M] (Middle speed) [L] (Low speed) Burst speed (pictures/ Mechanical shutter - second) Electronic Shutter 40 8 (AFS) 6 (AFC) 10 (AFS) 6 (AFC) 6 6 2 2 Live View during Burst Mode ¢1 With RAW files Without RAW files None - Max. 120 None Available 40 or more¢2 100 or more¢2 Available ¢1 Number of recordable pictures ¢2 When recording is performed under the test conditions specified by Panasonic. The burst speed will become slower halfway. However, pictures can be taken until the capacity of the card becomes full. Depending on recording conditions, the number of burst pictures that can be taken will be reduced. • The picture size will be fixed to [S] when [Burst Rate] is set to [SH]. • The burst speed may become slower depending on the following settings. - [Picture Size] (P192)/[Quality] (P193)/[Sensitivity] (P112)/Focus Mode (P95)/[Focus/Release Priority] (P212) ∫ About the maximum number of pictures that can be taken continuously When you press the shutter button halfway, the maximum number of pictures you can take continuously will appear. You can check 0 200 r20 the approximate number of pictures that can be taken before the burst speed slows down. Example: When 20 pictures can be taken: [r20] • Once recording starts, the maximum number of pictures that can be taken continuously will decrease. When [r0] appears, the burst speed will slow down. • When [r99+] is displayed, you can take 100 or more pictures continuously. 135