Panasonic DC-ZS80D Advanced Owners Manual - Page 117

4K Photo and Drive Settings Burst function Recording mode: ■■Setting [Burst Rate] Select [Burst] and pressing Select the burst rate with in step 2 (→116) , and press [MENU/SET] [H] [M] [L] (High speed) (Middle speed) (Low speed) Speed (pictures/sec.) [AFS] / [MF] 10 5 2 [AFF] / [AFC] 5 Live View during burst recording [AFS] / [MF] [AFF] / [AFC] None Available Available Available Number of With RAW files recordable pictures*1 Without RAW files 26 or more 100 or more *1 When recording is performed under the test conditions specified by Panasonic. Pictures can be taken until the card becomes full. However, the burst speed will become slower halfway through the recording. The number of burst pictures is limited by the picture-taking conditions and the type and/or status of the card used. ■■About the maximum number of pictures that can be taken continuously When you press the shutter button halfway, the maximum number of pictures you can take continuously will appear. You can check the approximate number of pictures that can be taken before the burst speed slows down. Example: When 20 pictures can be taken: [r20] ••Once recording starts, the maximum number of pictures that can be taken continuously will decrease. When [r0] appears, the burst speed will slow down. ••When [r99+] is displayed, you can take 100 or more pictures continuously. ■■To cancel the burst function Press [ ] button ( ), and then select [ ] ([Single]) or [ ] 117