Panasonic BTLH2600W BTLH2600W User Guide - Page 30
REMOTE Specifications, GPI terminal
View all Panasonic BTLH2600W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
REMOTE Specifications REMOTE operation is possible on this monitor using the GPI/RS-232C terminal. GPI terminal Each of the items in the GPI screen are compatible with the following terminals. You can assign functions to each terminal in the menu GPI screen (J page 26). The functions assigned to each terminal operate when the GND (5 Pin) is connected (ON) or open (OFF). Pin number Signal 1 GPI1 g Operating conditions Level operation: operates when GND is connected. Edge operation: operates when GND changes from 2 GPI2 open to connected. GPI Terminal (9P) 3 GPI3 • If you have assigned a level operation function to 4 GPI4 more than one terminal, the function operates as long 5 GND as one of the terminals is connected. 6 GPI5 7 GPI6 8 GPI7 9 GPI8 Assignment items Function UNDEF No settings (no terminal assignment functions) MARKER1 ON/OFF*1 Switches the marker display of the marker decided in "GPI PRESET1" (J page 17) in the "MARKER" menu. MARKER2 ON/OFF*1 Switches the marker display of the marker decided in "GPI PRESET2" (J page 17) in the "MARKER" menu. MARKER BACK HALF*2 Reduces the brightness of the background outside the marker displayed in "GPI PRESET1" (J page 17) by 50%. MARKER BACK BLACK*2 Reduces the brightness of the background outside the marker displayed in "GPI PRESET1" (J page 17) to 0%. CENTER MARKER Switches the center marker display ON/OFF. (When other markers are being displayed, this is superimposed on the other markers) INPUT SEL. VIDEO Switches the input system to VIDEO. INPUT SEL. Y/C Switches the input system to Y/C. INPUT SEL. SDI1 Switches the input system to SDI1. INPUT SEL. SDI2 Switches the input system to SDI2. INPUT SEL. YPBPR/RGB Switches the input system to YPBPR/RGB. SD ASPECT Sets the aspect ratio settings when using SD signal input. (Disabled when using HD signal and PC signal) SCAN You can switch the scan mode between "UNDER" and "NORMAL". (Disabled when using PC signal) R-TALLY*3 Lights the red tally. G-TALLY*3 Lights the green tally. MONO GAMMA SEL. FILM GAMMA SEL. STDIO/PST RGB SYNC*4 Switches between color and monochrome (MONO). (Disabled when using PC signal) Used to switch the gamma characteristic to the FILM mode. Used to switch the gamma characteristic to the STDIO/PST mode. Used to select SYNC at the time of RGB-VIDEO input. Operating conditions - Level operation (Connected: ON, Open: OFF) Level operation (Connected: ON, Open: OFF) Level operation (Connected: ON, Open: OFF) Level operation (Connected: ON, Open: OFF) Level operation (Connected: ON, Open: OFF) Edge operation Edge operation Edge operation Edge operation Edge operation Level operation (Connected: 16:9, Open: 4:3) Level operation (Connected: UNDER, Open: NORMAL) Level operation (Connected: ON, Open: OFF) Level operation (Connected: ON, Open: OFF) Level operation (Connected: Monochrome, Open: Color) Level operation (Connected: FILM mode, Open: STANDARD mode) Level operation (Connected: STDIO/ PST mode, Open: STANDARD mode) Level operation (Connected: EXT, Open: G-ON) *1 When the 16:9 marker and 4:3 marker are simultaneously selected and activated on the 16:9 aspect display, both markers are displayed. *2 When the 16:9 marker and 4:3 marker are simultaneously displayed, the background selected with the 16:9 marker is controlled. *3 When both "R-TALLY" and "G-TALLY" are ON at the same time, the tally color becomes orange. *4 This is only enabled when "RGB-VIDEO" is selected in "YPBPR/RGB" in the "INPUT SELECT" menu. 30