Panasonic AGHMC80 User Manual - Page 96
Main warning displays
View all Panasonic AGHMC80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 3: Screen displays and setting menus Screen displays (continued) Main warning displays The main warning displays appearing on the viewfinder are listed below. If a warning display is not listed, check carefully the message displayed. ■ Number 1394 INPUT ERROR OTHER FORMAT The format of the signal input to the DV terminal while in DV IN mode differs from the unit's settings. Check the format of the signal input to the DV terminal. ■A ALL DATA WILL BE DELETED. (INCLUDING CLIP OF AVCHD) FORMAT THE CARD NOW? Do you wish to format the SD Memory Card now? Yes/No ALL DATA WILL BE DELETED. (INCLUDING CLIP OF DV) FORMAT THE CARD NOW? Do you wish to format the SD Memory Card now? Yes/No AVCHD/DV SW CHANGED TURN POWER OFF Switch the power off and back on again. ■C CANNOT BE USED DUE TO INCOMPATIBLE DATA. No use is possible because the standard for the data is different. If the SD Memory Card was used on another device, reformat the card with this unit. CANNOT DELETE WITH THIS BUTTON Clip cannot be deleted. CANNOT DELETE. Clip cannot be deleted. CANNOT PLAY WITH THIS BUTTON No playback is possible. CANNOT PLAY. No playback is possible. CANNOT RECORD DV MODE INTO THIS CARD. Use an SD/SDHC Memory Card in Speed Class 6 or higher. CANNOT RECORD PH MODE AND HA MODE INTO THIS CARD. This card cannot be recorded to in PH mode or HA mode. Use an SD/SDHC Memory Card in Speed Class 4 or higher. CANNOT SET PRE-REC, CARD CAPACITY TOO LOW. PRE-REC cannot be set as the remaining card capacity is low. CARD DOOR IS OPEN Close the card door. CARD ERROR. PLEASE REFORMAT. Formatting has failed. The card needs to be reformatted. CARD FULL. The card is full. CARD LOCKED. Unlock the card. 96