Panasonic 26PEK1U6 Operating Instructions - Page 17

163011_SingleSplit_EN_2.fm Page 17 Thursday, September 15, 2011 9:03 AM USING WIRELESS REMOTE CONTROLLER (CONTINUED) How to Use Wireless When using the wireless remote controller, always point the unit's transmitter head directly at Remote Controller the air conditioner's receiver. Air conditioner (Transmitter head) Remote control receiver Wireless remote controller Wireless Remote Controller Installation Position The wireless remote controller can be operated from either a non-fixed position or a wallmounted position. To ensure that the air conditioner operates correctly, do not install the wireless remote controller in the following places: • In direct sunlight • Behind a curtain or other place where it is covered • More than 19 ft away from the air conditioner • In the path of the air conditioner's air stream • Where it may become extremely hot or cold • Where it may be subject to electrical or magnetic interference 1. If Non-fixed Position Raise the rear plate of the remote controller mounting cradle and insert the wireless remote controller. The unit can be used either in that position (placed on a table, for instance) or held in the hand. Wireless Remote Controller Remote Controller mounting cradle Rear plate 2. If Wall-mounted Fixed Position Install the wireless remote controller at a convenient location on a nearby wall. However, before attaching the wireless remote controller mounting cradle, check that the wireless remote controller can operate from the desired wall position. Fasten the Remote Controller Fitting the Remote mounting cradle with screws. Controller in the mount. 2 Press 1 Put in Remote Controller mounting cradle 17