Onkyo TX SR803 Owner Manual - Page 37

5943@&OCPPL 1BHF  'SJEBZ "VHVTU Connecting Your Components-Continued Making HDMI Connections Step 1: Use HDMI cables to connect the TX-SR803/803E's HDMI jacks to your HDMI-compatible DVD player, TV, projector, and so on. Step 2: Assign each HDMI IN to an input selector in the HDMI Video setup (see page 43). Video Signal Flow Chart Digital video signals received at HDMI IN HDMI IN 1 and 2 are only output by the HDMI OUT and sent to your TV. Composite TX-SR803/803E video, S-Video, and component video input signals are not output by the HDMI OUT HDMI OUT. Composite Composite S-Video Component S-Video Component Note: • The onscreen setup menus are not output by the HDMI OUT, so you'll also need to make a composite video, S-Video, or component video connection to your TV (see page 26). Audio Signal Flow Chart Digital audio signals received at HDMI IN 1 or 2 are output by the speakers and headphones connected to the AV receiver. They're also output by the OPTICAL OUT and can be output by the HDMI OUT by setting the HDMI Audio Out setting to On (see page 79). IN TX-SR803/803E OUT HDMI * HDMI Optical Coaxial Analog Optical Analog * To listen to audio received at HDMI IN 1 and 2, through your TV's speakers, set the HDMI Audio Out setting to On (see page 79). Note that some audio (e.g., DVD-Audio) may not be output by your TV. Also, audio formats and sampling rates not supported by your TV may not be output. Be sure to configure your DVD player's output settings appropriately. TV HDMI IN HDMI OUT DVD player HDMI HDMI IN 1 37