Omron HBF-510W Instruction Manual - Page 29
Troubleshooting
View all Omron HBF-510W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Care and Maintenance ERROR INDICATORS ERROR DISPLAY CAUSE CORRECTION Your palms or feet are not positioned over the electrodes correctly. Make sure you are barefoot. Make sure your palms or the soles of your feet are clean and dry. Make sure your palms or feet are correctly positioned. Refer to CORRECT POSTURE FOR MEASUREMENT on page 22 and How to Hold the Grip Electrodes on page 23. The measurement position was not stable. Your palms or feet were not placed correctly. Remain still and do not move until the measurement is complete. Refer to CORRECT POSTURE FOR MEASUREMENT on page 22 and How to Hold the Grip Electrodes on page 23. Your palms or feet are too dry. Slightly moisten your palms or the soles of your feet with a damp towel and retake the measurement. The Body Composition values are outside the measurement range. • Check the settings entered for your personal data. Change the settings if needed. Retake the measurement. • The main unit cannot measure body composition outside its measurement range, even if the age, gender and height settings are correct. Refer to Display and Set Ranges on page 34. The monitor is not set up correctly. Remove the batteries. Wait one minute. Reinstall the batteries. Refer to BATTERY INSTALLATION on page 16. Press the Power Switch and turn the monitor on. Retake the measurement. You stepped onto the measurement platform before 0.0 lb was displayed. Wait until 0.0 lb is displayed before stepping onto the measurement platform. The monitor was moved before 0.0 lb was displayed. Movement during measurement. Monitor detected weight over 330.0 lb. Do not move the monitor until 0.0 lb is displayed. Do not move until measurement is complete. This monitor can only be used by people weighing less than 330.0 lb. 29