Oki OKIPOS T400TT-Parallel Users Guide - Page 131
Print Mode
View all Oki OKIPOS T400TT-Parallel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Print Mode Command Structure Command Function Input to Printer Printer Output Special Notes PMa a = 0 Continuous 1 Tear-Off 2 Cut, Backfeed after print 3 Cut, Backfeed before print 4 Cut, no Backfeed 5 Reserved 6 Reserved 7 Dispense, Backfeed after print 8 Dispense, Backfeed before print Example: See above Placement: Separate data stream sent to printer Default: Default value set by PG command To set the print mode for a job. A PM1 Z There is no printer output as a result of this command. 1. When power is cycled, the value set by this command is lost and replaced by the default value stored in the EEPROM. 2. To change the value stored in the EEPROM, use the PG Printer Setting command or use the Printer Setting Utility program contained on the CDROM shipped with the printer. 122