Oki MICROLINE 491 OkiLAN 6120i? Userfs Guide - Page 53
Introduction
View all Oki MICROLINE 491 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Section 3 - Chapter 1 - Introduction Chapter 1: Introduction Overview This section contains instructions and information on how to configure your OkiLAN 6120i in the NetWare environment. There are three environments in which to configure the OkiLAN 6120i: • Bindery (NetWare 3.x) • NetWare Directory Services (NDS)-for NetWare versions 4.1 and later • NDPS for NetWare 4.x and 5.x. Before You Start • You should be familiar with network administration as well as the physical setup and operation of your network. • Write down the serial number and the Ethernet or Token-Ring address of your OkiLAN 6120i. You will find these numbers on the OkiLAN 6120i enclosure. • Install the OkiLAN 6120i hardware and connect the cabling-see Section I. Instructions for hardware installation are found in Section I of this manual. • Install the OkiNet Utility for NetWare-see Section I. III - 4 OKI OkiLAN 6120i User's Guide