Oki MC360MFP MC360 MFP Setup Guide (English, Fran栩s, Espa?ol, Portu - Page 11
Setting Access Control
View all Oki MC360MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1. In the top level screen, scroll down to Menu and select using the Enter key. 2. In the drop down menu, scroll down to the Admin Menu and select using the Enter key. Enter the password. 3. In the drop down menu, scroll down to Fax Setup and select using the Enter key. 4. In the drop down menu, scroll down to Basic Setup and select using the Enter key. 5. In the drop down menu, scroll down to the Ring Response and select using the Enter key. 6. In the drop down menu, scroll down to the response time required and select using the Enter key. 7. Using the Left arrow key, return to the top level menu. Setting Access Control The operation and functionality of this machine can be limited only to authorized personnel by the simple introduction of a 4-9 digit PIN (Personal Identification Number). This is known as Access Control. The greater the number of digits in the PIN, the more secure it is. Enable/Disable Access Control To enable Access Control, use the menu to go to: Menu >Admin Setup>System Setup>Access Control and select Enable. • With Access Control set to Enable, the display reverts to the System Setup screen immediately following the setting change. If one of the functions such as Print, Fax Send or PC Scan is running however, the display will only revert to the System Setup screen when the task has been completed. 11 English